Arcade Collecting > Restorations & repair |
Golden Tee FOUR gurus I need some help. |
(1/1) |
Twistedgearhead:
I have a golden tee four 2005 red board and ended up loosing a couple pads while replacing chips. Does anybody have schematics of the red board or can identify where these pads run? U20 pin 3 U112 pin 11,17,33,34 U110 pin 11 U111 pin 17 U112/111/110 are ram chips and the data sheet is saying those pins are not connected so I may have lucked out there. But U20 is part of the IDE interface and pin 3 has continuity to several places on the board (using diode mode) one way, so I know it runs somewhere. Its an internal trace so there is nothing to follow on the board. Any help would be much appreciated! |
Navigation |
Message Index |