| Arcade Collecting > Restorations & repair |
| Picked up a machine for free, don't have too much information on it... |
| (1/2) > >> |
| kingted:
Anyone have any info on it? Got it for free, doesn't work, haven't tried to power it on yet, I'd like to get it open but don't have a key... --- End quote --- Here's some more photos https://imgur.com/a/PEj7Qmr Can I just put a new plug on this and plug it in? The 100v is confusing me. As for the the key, I'd rather not drill it out. Is this a common type of lock? Are there master keys? Thanks in advance. |
| pbj:
You should be able to get into it from the back. Just put a new plug on it, 110V is close enough. |
| kingted:
Hi, thanks for the reply. The cabinet is covered with these one way rivet type fasteners which I believe is because it's a slot machine type game (maybe I'm wrong). The only way I could see getting in through the back is by cutting it open although there is a small hole where I can see inside and even see the lock up front but I can't really reach it. |
| jennifer:
I doesnt do you any good if you can't get into it, mice may have been in there and at best would only be a fire hazzard...Original, is a fun thought but not really practical sometimes if it could potentially burn your house down...I would personally drill the lock and not lose a minutes sleep. |
| Ken Layton:
That's a "pachislo" Japanese slot machine. Suggest you join this forum: https://www.pachitalk.com/forums/index.php? They can tell you all about your machine and how to get in it without a key. |
| Navigation |
| Message Index |
| Next page |