Main > Raspberry Pi & Dev Board
How to make a dedicated MAME 0.250 Appliance on a Raspberry Pi 4/Pi 400
bbegin:
--- Quote from: Jaseguges on March 08, 2022, 08:49:43 pm ---Hello, arcade and forum noob here. I really love the idea of eliminating RetroPie and having just Mame with AttractMode on my Rpie 3 B+. I've tried my best to get the image working on my pi but I cant manage to get to the AttractMode Menu. Is there a guide with step by step instructions that I could refer to? Really love what you're doing here, hope to get it running soon. Thanks!
--- End quote ---
Hello, yes I built a step-by-step guide to build the image. The only steps I need to add is how to build Attract Mode and Hypseus Singe (wich are incluses un the pre-built image).
The steps are un french, but you can translate Them (see 2nd link):
https://gist.github.com/sonicprod/f5a7bb10fb9ed1cc5124766831e120c4
Google Translation to English:
https://translate.google.ca/translate?hl=fr&tab=wT&sl=fr&tl=en&u=https%3A%2F%2Fgist.github.com%2Fsonicprod%2Ff5a7bb10fb9ed1cc5124766831e120c4
Jaseguges:
Thanks for getting back to me! I downloaded the image from the link on the original post and flashed it to my SD card. Do I still follow the instructions on GitHub?
bbegin:
--- Quote from: Jaseguges on March 09, 2022, 09:04:09 am ---Thanks for getting back to me! I downloaded the image from the link on the original post and flashed it to my SD card. Do I still follow the instructions on GitHub?
--- End quote ---
No, you don't need to follow the instructions on Github for the pre-built images. Everything is in there.
The instructions on Github are there if you want to built the image for yourself, from scratch. This way, you may be able to adapt it for Raspberry Pi 3B+.
Enjoy! :cheers:
Jaseguges:
Oh I see, the problem is I only have a Pi 3 B+. Looking forward to getting a pi4 so I can use this awesome image, thanks!
:cheers:
nts31180:
Very large Raspberry Pi noob here. I downloaded the image, used Etcher to install on an sd card. Plugged SD card into my new Raspberry Pi 4B. And when booting it is open to a black screen, with information at the bottom. References a start4.elf: is not compatable ; This board requires newer software.
I apologize if this is a dumb question....
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version