Main > Consoles

XBOX vs WG 4600

<< < (2/2)

tjrick:
Thx for the warning howard. I am not doing anything irreversible. However, I suspect that the cabinet isnt original. Has bad dudez in it but name on top is different. I used to play bab dudez growing up so it has nostalgia.

How do I hook the controller you gave me to the jamma harness? I dont see and plugs that plug I can plug into the monitor anywhere. I understand how to hook the xbox onto the controller you linked but I dont see what hooked to the monitor. Do I actually insert the controller into something on the monitor or am I going to run wires from the controller to the monitor input? I see the area marked 8 that looks like an area I would hook stuff to but it isnt quite clear for this simple mind.

For example, I also found this:
https://www.ultimarc.com/console-adapters/console-adapters/x-box-av-to-j-pac-speaker-adaptor/

Does it do the same thing? If it does, why does it look so different? But it also isnt clear to me how I plug that one into the monitor either. It just says "To arcade monitor" but there isnt actually any plugs to run to the monitor.

Sorry about the question, I am a total noob at this. I totally appreciate all your time.

Drnick:
Disconnect jamma wiring from existing Bad Dudes board and connect to this timer board which in turn connects to xbox.

See following video for Xbox360 version.


Looks like he is also using a jamma extender in the video :)
https://www.arcadeworlduk.com/products/jamma-harness-extension-cable-fully-wired.html

tjrick:
Awesome thx! I will order it and give it a whack!

Navigation

[0] Message Index

[*] Previous page