| Main > Main Forum |
| CPS3 Naomi and PC |
| << < (4/5) > >> |
| Sephroth57:
you can get a DB25pin 3 way switch. its a box that takes 3 of those plugs , and outputs one to the arcade controls, and you could mount that right inside your coindoor so you could just open it and switch |
| AX:
now thats a sweet idea. i'm starting to formulate a nice plan here. thanks everyone. |
| Dave_K.:
--- Quote from: Sephroth57 on February 20, 2004, 08:29:40 am ---you can get a DB25pin 3 way switch. its a box that takes 3 of those plugs , and outputs one to the arcade controls, and you could mount that right inside your coindoor so you could just open it and switch --- End quote --- Don't forget, you will need to switch the sound and video also...if you try to put that on the db25 along with your 2 player console controls, you will be left with a control panel that only has 2 buttons per player! So it looks like you would need multiple switch boxes. ;D Did someone say this was easier?? |
| AX:
no problem. scsi 50 pin should do the trick. |
| AX:
another I dea i have is using hte dual jamma board to connect 1 real game say mvsc2 and the other the pc using pc2jamma instructions. only thing with this is, I would need to find the jamma cab guts or an empty jamma cab. basically, all i would nee di sthe following http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3275171601&category=13718 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3275878291&category=13718 add those to my cab and use the pc2jamma setup along with a power supply. what power supply though? |
| Navigation |
| Message Index |
| Next page |
| Previous page |