| Arcade Collecting > Restorations & repair |
| StarWars Trilogy- force feedback not working (SOLVED) |
| (1/1) |
| perjmolsen:
Hi I need help... Suddenly my force feedback stopped working on my sega starwars deluxe. BUT strange when i boot the game, it still does it's selftest, moves the stick and no errors are displayed. If I look at the segment display on what I assumes is the driver board, it just says 8. 8. I assume that this code just are displayed when the board works? Because I can not find the 8. 8. error code in the manual. https://www.gamesdatabase.org/Media/SYSTEM/Arcade/Manual/formated/Star_Wars_Trilogy_-_1998_-_Sega.pdf If I go to the test menu and test the output, Event0 and Even1 is doing nothing. As I recall event0 normal lights up the left red button, and Even1 the right red button. There is always just a faint red light in the left right button, normal there is only light when I need to press the buttion durring gameplay. Also if I test the force feed back in the test menu the stick does not move. SO... I assume there is no fault on the driver board because I do not get any error codes on the display? I have checked the fuses all are good. A small video of the test menu |
| perjmolsen:
FIXED! :applaud: I have fixed the force feedback issue! You newer guess what the cause where..... It where the CPU board!! I tested the pots as you wrote, they where fine. I where wondering why I did not get any error on bootup, nither on screen or the motor controller board. Also that the left lamp always where lid up a bit. So I where thinking... (It happens sometimes) 😉 Can I be a signal that there is missing, I had movement in bootup selftest, so my wiring, motors, controller board and the tow servo board might work..might... I for some time ago has purchased some defect model3 step 3 board set's on ebay.. that I am currently working on the video pcb's--- But I had managed to fix one of the cpu boards just by changing the supercap. So I tried to put in the cpu board that I had fixed.... AND NOW THE force feedback are working! Also the event0 and event1 is working perfect!. Now when i had it opened, I changed the two cage fans to some new ones, just to be on the safe side that the cooling is running. |
| Navigation |
| Message Index |