Main > Everything Else |
So I've been building an ultralight |
<< < (14/55) > >> |
Zebidee:
Funny that you mention the venerable Datsun 120Y, and previously bits both missing and left over. I used to drive around Canberra in a Datsun 120Y, and had developed a few mechanic skills by that time. I've changed the very radiator hoses that you've used. I've also pulled apart, cleaned, and rebuilt the carburetor (the bit that feeds fuel from a cup) because it was chugging a bit at times. As an aside, most modern engines got rid of carburetors and use DFI, direct fuel injection, more reliable... especially for airplanes lol. In WWII the famous Spitfire Merlin engine was limited by carburetors that failed when in inverse G maneuvers ... the ME109 had DFI and thus an advantage in some situations. So +1 for fuel injection. Anyways, back to now, if you've never pulled apart and rebuilt a carburetor before, I recommend you keep it that way. wasn't fun. There were like 110 tiny parts for that 120Y carby. No service or workshop manual tracked them all. It was in the days before digital cameras and smartphones, so no before or progress pics. Over about two days I got it apart. I cleaned it. I reassembled it, reinstalled it, all worked well and better than before. But there were still like 4 parts left over! :o EDIT: Been following your project, very impressive, make sure you post before taking off :P :cheers: |
danny_galaga:
Hehe. Carbies are still very common on aircraft. Mine has twin carbies, but there is a fuel injected version. My sister's first car was a 120y. Dad and I rebuilt the engine as it was blowing a lot of smoke . We actually tied the engine to a pole and lifted it out by hand 😄 |
pbj:
Still hasn’t left the ground. :notworthy: |
danny_galaga:
--- Quote from: pbj on May 14, 2023, 10:04:32 pm ---Still hasn’t left the ground. :notworthy: --- End quote --- Much safer that way |
Zebidee:
Yeah, the 120Y engines are tiny and the bay is very roomy. Good one to learn on! If you have a big enough hill, and a ramp, you can make a Datsun 120Y fly. I did once get my Holden HJ ute to fly. That was due to a series of hilarious but disastrous events, starting with the throttle suddenly stuck ON (rusty throttle cable) at 110km/h, leaving the road to avoid another car, then into a ditch (it appeared out of nowhere) and then bouncing out again on the crappy suspension (I wisely chose, in that split second, to NOT brake), and ending with us flying through the air for some indeterminate distance (it was very dark) before finally stopping landing. After that Dukes-of-Hazzard moment, my friend and I looked at each other with that look of understanding... that we are both somehow miraculously alive. Even better, the throttle had somehow become unstuck :D WD40 on that sucker for next time. Afterwards was tempted to paint red flying kangaroos near the rear tail lights (reference to Qantas). |
Navigation |
Message Index |
Next page |
Previous page |