Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Golden Tee Fore Complete Not Working  (Read 1636 times)

0 Members and 1 Guest are viewing this topic.

heydude348

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:April 29, 2020, 10:48:01 am
  • I want to build my own arcade controls!
Golden Tee Fore Complete Not Working
« on: April 08, 2020, 12:12:42 pm »
Brand new to the forum. Have no previous knowledge/experience working on/troubleshooting any arcade machines. Having said that , anyone kind enough to respond with advice/help keep that in mind. Thank you in advance for any help.
So heres what's happening. Game powers up as far as lights on boards. I get no picture or audio. I notice when I power on the arcade I get about 1-2 minutes of audible "clicking" coming from what appears to me to be on either the main board or the board(S) below the monitor. That's about all the checking I have done. Not sure if theses (GT) are notorious for having one issue or if it could be a number of things. If anyone has any advice/troubleshooting I would be grateful and encouraged to attempt them.Thanks again for your time.

mourix

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 302
  • Last login:Yesterday at 07:14:04 pm
Re: Golden Tee Fore Complete Not Working
« Reply #1 on: April 09, 2020, 01:04:14 pm »
Definitely check your voltages. Also, is there sound coming from the speakers when you coin up? Does the monitor show anything on screen, even if a faint line or light hue?

I attached the manual for your machine. It got a nice troubleshooting section. Good luck!

heydude348

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:April 29, 2020, 10:48:01 am
  • I want to build my own arcade controls!
Re: Golden Tee Fore Complete Not Working
« Reply #2 on: April 17, 2020, 04:31:13 pm »
So after a little more investigating I noticed there was a random "clicking" noise and I tracked it down to what Im calling a "hard drive".Silver box to the right of the "mother board". Western Digital 75AA.I have 4 solid red "LED" on D75,D76,D77,D78 and a blinking Green LED on D5A(Status 2).I also have a solid Green LED on D20(Status 1).The speaker "pop" when the unit is powered on but no sound/video.