Author Topic: FS: WG K7000 P538 series chassis - no neckboard (Read 1228 times)

joej85a · « **on:** April 07, 2020, 07:12:48 pm »

Hey gang, if you followed my repair thread, you will know I bought a functioning WG k7197 P538 chassis that had a mismatched neckboard with it as a backup. It is functional, I tested it. It is setup for a 25" screen. HOWEVER, when I tested it, my red gun was not firing. I am not sure if it was the chassis or the neckboard, but in full disclosure, there may be an issue with the red circuit. Other than that I can verify it is functional. Does need a full recap kit, looks like it has been selectively recapped over the years. I got it for a good deal, $60 shipped, so due to all the help I got this from this board getting my original up, I would like to pass it back on for what I have in it. So, $60 shipped.

PM me if you are interested.

behrmr · « **Reply #1 on:** April 08, 2020, 09:49:53 am »

I’ll take this. PM me payment info.

joej85a · « **Reply #2 on:** April 16, 2020, 06:52:04 pm »

Sold thanks all


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: FS: WG K7000 P538 series chassis - no neckboard (Read 1228 times)

joej85a

FS: WG K7000 P538 series chassis - no neckboard

behrmr

Re: FS: WG K7000 P538 series chassis - no neckboard

joej85a

Re: FS: WG K7000 P538 series chassis - no neckboard