Author Topic: Mortal Kombat 2 Wiring Harness (Read 947 times)

Thetauri1999 · « **on:** March 06, 2023, 02:22:31 pm »

Can anyone post a link to the wiring harness I would need to replace the original wiring harness for the joysticks and buttons for a dedicated MK 2 arcade game?

PL1 · « **Reply #1 on:** March 06, 2023, 05:02:06 pm »

Quote from: Thetauri1999 on March 06, 2023, 02:22:31 pm

Can anyone post a link to the wiring harness I would need to replace the original wiring harness for the joysticks and buttons for a dedicated MK 2 arcade game?

According to the KLOV entry about this cabinet, Mortal Kombat II uses a standard JAMMA harness on connector P1.
- Any standard JAMMA harness will be fine as long as it has the -5v lines for audio and you check that pins 25, 26, c, and d are not connected to be sure that you don't get a mis-labeled "CHAMMA" (Chinese JAMMA) harness.

MKII also uses a 4 wire "kick" harness on connector P5 with "Low Punch" and "Low Kick" for P1 and P2.

Here are the pinouts for MKII wiring.
https://www.arcade-museum.com/pinouts-game/8756.html

Scott


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Mortal Kombat 2 Wiring Harness (Read 947 times)

Thetauri1999

Mortal Kombat 2 Wiring Harness

PL1

Re: Mortal Kombat 2 Wiring Harness