Main > Monitor/Video Forum
Help repairing/replacing this Wei-Ya chassis
ahofle:
I pulled it out to take the measurements in the pics. The flyback is sparking all over so no point in plugging anything back in yet.
princess prin prin:
Electrohome G07 may be compatible with that tube.
grantspain:
is there not a code on the flyback
Ken Layton:
There must be a label on the flyback with part numbers.
Could be a possibility the B+ voltage is too high and the safety shutdown circuit isn't working.
Is there cracks in the flyback?
princess prin prin:
--- Quote from: Ken Layton on March 25, 2020, 12:32:54 pm ---Could be a possibility the B+ voltage is too high and the safety shutdown circuit isn't working.
--- End quote ---
This POS chassis doesn't even have a shutdown circuit. The shutdown pin (9) of the HA11235 is not used!
https://www.arcade-museum.com/manuals-monitors/Weiya%202820HR%20lower%20half.pdf