Main > Monitor/Video Forum
60in1 CRT sizes go beyond
Surfovod:
Hello.
I connected a 60v1 game board to the Panasonic TV TC-2155R.
Chassis Model - MX-3C
Processor Model - AN5192K
I attach date sheets
Connected as follows
The image goes beyond the screen.
Also the image has a slight tremor
I have never encountered this before. Please tell me how to cure this?
Surfovod:
connected another image source (DVD) via AV - image geometry is normal, there is no tremor
lilshawn:
60-in-1 boards don't have a 100% standard output. they expect you to be able to easily adjust the horizontal and vertical position and size to properly fit the screen. (like with an arcade monitor.) this is not so easily done with a modded TV or even an LCD hoked up to VGA for that matter. Some LCD's cant adjust the horizontal far enough to properly fit the screen. Modified TV's may not have the ability to adjust the geometry enough to fit properly.
it's just an oddity of these boards.
Surfovod:
Can geometry be adjusted by replacing parts?
Or through the service menu.
Only the native remote control is lost. Can I enter the service mine without a remote control?
lilshawn:
it's going to highly depend on your video device. some have a service menu that you can adjust geometry. others are done at the factory with no adjustments.
you may or may not be able to access the menu with universal type remote. again, it's going to highly depend on the display. some it's like hold menu and press 481475... some are like disassemble remote and press hidden "button" inside remote. (button hidden by overlay or such.)