| Main > Main Forum |
| alternatives to daisy chaining negative wires....? |
| << < (4/5) > >> |
| mp2526:
I've used these two products in the past. Pretty easy to setup. Dual Row 8 Position Barrier Strip http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F011%5F003%5F009%5F000&product%5Fid=274%2D670 8 Position Jumper http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F011%5F003%5F009%5F000&product%5Fid=274%2D650 The jumper slips onto one side of the barrier strip and connects all the points, then I drilled a hole on the jumber strip and connected a wire to it and the ground. |
| eightbit:
Get a better crimper and you will never have another bad crimp. |
| MinerAl:
Would a wire nut work? Just strip about 1/2 an inch on each wire, twist them all together and screw on an electrical wire nut. Not elegant, but it should work pretty well. |
| GroovyTuesdaY:
--- Quote from: eightbit on February 17, 2004, 09:54:36 pm ---Get a better crimper and you will never have another bad crimp. --- End quote --- LOL, thats a bunch of crap lol. My crimper was 23.99 and was highly recommended over all the others by an actual electrician , so i do not think a better crimper will solve my troubles. Sorry eightbit, nice try though :) groovY~ |
| GroovyTuesdaY:
--- Quote from: MinerAl on February 17, 2004, 10:11:24 pm ---Would a wire nut work? Just strip about 1/2 an inch on each wire, twist them all together and screw on an electrical wire nut. Not elegant, but it should work pretty well. --- End quote --- Not a bad idea, but i does stir some other ideas in my mind. I will have to play with them in my head a bit. If i come up with something i will post it here. g~ |
| Navigation |
| Message Index |
| Next page |
| Previous page |