| Arcade Collecting > Restorations & repair |
| Atari Centipede Cocktail table game has no power |
| << < (8/60) > >> |
| bperkins01:
First Q: I went back and read your original question: The 6 pin connector - J2 - is where the interlocks plug in - If you have nothing plugged into it - that's your problem.. The connector is hiding inside your cabinet someplace. Did you find that? Second: Your transformer is different than mine, I'm betting the 102v is also fine.. Maybe its an ARI and not an ARII. I'd have to go look at other schematics Either way Whats the answer to Q1? |
| Mike A:
If he traces his way backward he will find it. |
| bperkins01:
--- Quote from: Mike A on February 03, 2020, 08:14:46 am ---If he traces his way backward he will find it. --- End quote --- Agreed :) |
| jennifer:
That wire nut looks suspicious to me, those were usually crimped, and would expect to see a grommet or something there, somebody has done work...I would take a closer look in that area. |
| Mike A:
--- Quote from: vapuser on January 28, 2020, 07:00:27 pm ---Mike, I found the problem. I now remember that I had put a white and black jumper in J2 so that I could test out the power supply. So I removed those jumpers and plugged that male power connector into J2. Now back to my original problem, I still have no power. No lights and no sound. Where to start. Any suggestions? --- End quote --- It looks like J2 goes to the interlock switch and the power switch. Both of those could cause no power to flow to the rest of the cab. |
| Navigation |
| Message Index |
| Next page |
| Previous page |