| Main > Project Announcements |
| Maybe we don’t call you ‘C-Type’ anymore? |
| << < (7/7) |
| MiteWiseacre:
Thanks Jeremy, So yesterday I laid out the lines for the faces, traced the ends of each line onto the edge of the lower panel and drew lines on that as well. Cut all the bracing.. just 1x2 strapping. Glued and stapled them in with the brad nailer. My lines seemed to line up pretty great, this method much easier than what I've tried in the past using measurements etc. Should have a 1 1/4" reveal in general. That top sheet of ply not that great, gonna be getting some filler.. |
| MiteWiseacre:
Cut a bunch of the panels, need to be cleaned up a bit. Double check square and width, sand. Gotta make sure I take an 1/8 off the back panels so I don’t scuff everything removing them, don’t ask how I know this :banghead: Went a Frankenstein route and made 5 panels for the back, they won’t be seen much and 2/5 will be glued in. |
| minorhero:
Your almost ready to go 3D, exciting times! Lowering that TV into place will be a JOB. Try to get help when you do it if at all possible, or use a ceiling mounted winch. |
| Navigation |
| Message Index |
| Previous page |