Main > Lightguns
having two Aimtrak lightguns is the best way to lose your mind!
<< < (6/6)
argonlefou:
You can now enjoy a lot of games  :cheers:
Zebra:

--- Quote from: argonlefou on December 28, 2019, 02:49:30 am ---
--- Quote from: Titchgamer on December 27, 2019, 02:57:48 pm ---I dont recall having to change the rawdev parameters. But rawinput does need to be set to 1.

Look under model 2 on this github for full set up instructions:

https://github.com/argonlefou/DemulShooter/wiki/Model2

Also make sure you are using version 1.0 of M2. NOT the newer version.

--- End quote ---
1.0 is for TroubleShooter 1&2
DemulShooter needs the latest one (1.1a)  ;)


--- Quote from: Zebra on December 27, 2019, 05:15:25 pm ---It's worth checking which device number the model 2 emulator and Demul shooter / Troubleshooter 2 sees the Aimtraks as. For some reason they see it as device 4 on mine while mame lists it as device 3. When you unpack demul there is a second app under the main one which allows you to check this. You need this info when you install the scripts for the model 2 emulator.

Once you have it set up right, never change USB ports or add new devices. I'm always trying new devices so I end up having to redo the controls every time I play...

--- End quote ---
Aimtrak ID  or windows GUN ID are not used by Demulshooter, the device is detected by it's hardware "name" and this one doesn't change when you unplug/replug them

--- End quote ---

I have to use Troubleshooter as none of my gun devices show up in the Demul drop-down menu. In Troubleshooter they show up as device 1, device 2, device 3 etc. That number just happens to differ from their Mame ID.

lay72:

--- Quote from: argonlefou on December 29, 2019, 03:05:39 am ---You can now enjoy a lot of games  :cheers:

--- End quote ---
Thank you very much mate! :applaud:
Navigation
Message Index
Previous page

Go to full version