Main > Lightguns |
Any here made a Guncon 1 recoil gun? |
(1/1) |
Zebra:
I've been enjoying my Guncon 2 recoil gun mods for a while and now I want to do the same with my official Namco Guncon 1 (or Gcon 45 if you're from Narnia or Europe). I've run into a problem though. The trigger signal from the guncon 1 doesn't provide enough power to trigger my relays. I use independently powered relay timer triggers like this which take 5v from a micro USB phone charger but even with these, the Gcon 1 trigger won't activate it: https://www.ebay.com/itm/5V-30V-Delay-Relay-Timer-Module-Trigger-Delay-Switch-DIY-Micro-USB-Module-stable/173463895046?hash=item286340fc06:g:VHMAAOSwhO9bbk~c:sc:USPSFirstClass!10530!US!-1 I tested my relay trigger board with my Guncon 2 guns and with an Apac trigger and it worked fine. Has anyone here managed to create a recoil gun from an official Guncon 1? If so, what did you use to trigger the solenoid or ne555 board? BTW, interesting (ish) discovery. When I used this adapter to connect my guncon 1 to a PC, with my Apac also connected, Windows 7 recognized the guncon 1 as a 4 axis analog joystick as if it were part of the Apac. I think it might be possible to use the combo for mame. |
phasermaniac:
very interesting that converter is recognized as a pad! I use 2 gcon 45 in my cabinet using this other conversor: https://www.google.com/search?q=ems+dualshooter&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjXsuqw0P7mAhVYD2MBHfwGCn0Q_AUoAnoECAsQBA&biw=1920&bih=888#imgrc=QqatUXfJyUpQdM: I use one per lightgun, as it has two slots, one for lightgun other for pad. And it has a switch i put to ps2. So, with topgun driver it is detected as any ps2 lightgun, and I feel the gcon45 more precise than the ps2 guns I tested. I would like to add rumble to my guns too, but dont know how to do it. |
Zebra:
--- Quote from: phasermaniac on January 12, 2020, 01:01:38 pm ---very interesting that converter is recognized as a pad! I use 2 gcon 45 in my cabinet using this other conversor: https://www.google.com/search?q=ems+dualshooter&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjXsuqw0P7mAhVYD2MBHfwGCn0Q_AUoAnoECAsQBA&biw=1920&bih=888#imgrc=QqatUXfJyUpQdM: I use one per lightgun, as it has two slots, one for lightgun other for pad. And it has a switch i put to ps2. So, with topgun driver it is detected as any ps2 lightgun, and I feel the gcon45 more precise than the ps2 guns I tested. I would like to add rumble to my guns too, but dont know how to do it. --- End quote --- I have one of those EMS sharpshooter adapters too. I've never been able to make it work for anything including it's intended purpose. It didn't help my PC recognize the guncon 1 either but I never thought to try the EMS adapter on a PC with EMS Topgun drivers to use it as a GC2. I guess I never saw the point as there is already Windows drivers to use a Guncon 2 and the Guncon 2 hardware is superior to the original Gcon in accuracy, shot registering and the number of buttons etc. My interest in using the GC1 with my other adapter on a PC was avoiding the need for custom amateur imperfect drivers. Interesting find on the topgun drivers though. Does it still only work in 480i / 240p? I always assumed that was a hardware speed limitation with the Namco guns. |
Navigation |
Message Index |