April 23, 2024, 09:31:01 pm
Home
Help
Search
Login
Register
News:
Support this site
Shop
Amazon
through our link. Thank you!
Forum notices to gmail.com addresses are working. Microsoft addresses are still not.
The NEW Build Your Own Arcade Controls
|
Arcade Collecting
|
Merit/JVL Touchscreen
(Moderator:
lilshawn
) |
POST/Boot Issue
Main
Restorations
Software
Audio/Jukebox/MP3
Everything Else
Buy/Sell/Trade
Project Announcements
Monitor/Video
GroovyMAME
Merit/JVL Touchscreen
Meet Up
Retail Vendors
Driving & Racing
Woodworking
Software Support Forums
Consoles
Project Arcade
Reviews
Automated Projects
Artwork
Frontend Support Forums
Pinball
Forum Discussion
Old Boards
Raspberry Pi & Dev Board
controls.dat
Linux
Miscellaneous Arcade
Wiki Discussion
Old Archives
Lightguns
Arcade1Up
Try the site in https mode
Site News
Unread posts
|
New Replies
|
Recent posts
|
Rules
|
Chatroom
|
Wiki
|
File Repository
|
RSS
|
Submit news
« previous
next »
Send this topic
Print
Pages: [
1
]
Go Down
Author
Topic: POST/Boot Issue (Read 3606 times)
0 Members and 1 Guest are viewing this topic.
costanza
Trade Count:
(
0
)
Jr. Member
Offline
Posts: 1
Last login:November 14, 2019, 03:04:25 pm
I want to build my own arcade controls!
POST/Boot Issue
«
on:
November 14, 2019, 03:03:14 pm »
Hello All! This is my first post.
So I had an interesting issue last night. My MegaTouch GameTime (think it's a consumer version) wouldn't POST or boot. Checked the power supply and voltages were good. Checked to make sure everything was plugged in, reseated a few things but still no joy. What I wound up doing was adding a couple jumper wires (to use as a switch) to the mother PWRON jumpers and low and behold it booted.
This seems strange to me. What would prevent it from posting or booting? If there wasn't a switch there before...why does it all of a sudden need one? How was it configured to boot before when all that needed to happen was flipping the switch in the back to powerup the power supply.
-Costanza
Logged
mahkeymike
Trade Count:
(
0
)
Full Member
Offline
Posts: 755
Last login:
Today
at 07:46:11 pm
Re: POST/Boot Issue
«
Reply #1 on:
November 14, 2019, 09:16:10 pm »
Bios battery is dead. Replace battery, plug in a keyboard, hit DEL to get into bios, go under power managment and look for a setting that says after power loss and set it to power on after power loss.
You're welcome.
Logged
Send this topic
Print
Pages: [
1
]
Go Up
« previous
next »
The NEW Build Your Own Arcade Controls
|
Arcade Collecting
|
Merit/JVL Touchscreen
(Moderator:
lilshawn
) |
POST/Boot Issue