| Main > Everything Else |
| MPCNC build |
| << < (2/6) > >> |
| PL1:
--- Quote from: nitrogen_widget on October 29, 2019, 10:19:46 am ---I have a thread on the V1 site --- End quote --- Found it. ;D https://www.v1engineering.com/forum/topic/new-24-x-36-build-wny/ You weren't kidding in the OP when you mentioned "serious stringing" when you started. :o That looks like something from Shelob's lair. :lol Also amused by Barry's response to "100mm belt" in the other thread. :duckhunt Scott |
| nitrogen_widget:
I have to shave them with an exacto knife then sand them smooth with a dremel. I learned about retraction settings the day I woke up and saw that. i'll save the 10mm for the full sheet low rider. ;) 3d printer to make CNC parts to make low rider parts.... |
| nitrogen_widget:
how time flies. had too much going and knew if I put this together i'd get nothing I needed to get done, done. well it's cold outside now and I spent 4 hrs over the weekend learning why the cheap laser engraver someone gave me won't burn nice pictures to wood using grbl .8 and why I really need grbl 1.1 why that won't work on a controller board made for .8 and learned how to flash multiple versions to an Arduino nano. I then played the pre-patch for WOW 5 hrs and realized WTF am I doing? I have some down time now that it's cold out. why am I not putting my CNC together? i mean jeez, they already came up with a newer version of the MPCNC. but I already have everything for the previous version so I will still build that. so...here I am. staged it on lunch to start work on it tonight. Will update thread as i make progress. |
| nitrogen_widget:
putting this together and realized the grey corner pieces in the above pic are just too stringy and messy to use. So I need to reprint cleaner pieces. |
| Vocalitus:
You want to be careful with the fumes your 3D printer emits. Are you using OctoPi? with your printer? |
| Navigation |
| Message Index |
| Next page |
| Previous page |