Arcade Collecting > Merit/JVL Touchscreen

megatouch force touchscreen controller error

<< < (2/3) > >>

mahkeymike:

--- Quote from: billfield on October 27, 2019, 02:29:51 pm ---I had 2006 version before my hard drive died  so will it work with 2006.5 software ?

--- End quote ---

Both serial and usb controller works with 2006 and newer. You might want to try a hardware reset. There is a few dip switches on the ioboard to do a hardware reset. I don't remember which switches off the top of my head , but i want to say its 4 and 7, but you might want to do a google search, im too lazy to google. Good luck.

billfield:
Yes tried all the resets etc but still wont work .Do you think harddrive currupt ?

orizzle:
This is tough to follow because you're posting on 2 threads now, but did you say you had this problem with both drives? I doubt both drives are bad. It's your touchscreen controller or serial port that's the issue.

Sent from my Pixel XL using Tapatalk

billfield:
No my other post was my hard drive problem not the touchscreen .I killed my hard drive by putting a strong magnet in my torch ontop of it .Before i did that machine was working fine apart from the battery was flat which has now been replaced ,Many thanks This pic is what the new hard drive came up with when doing a dip switch 8 search Could this be currupt hard drive ?

mahkeymike:
If you just bought that hard drive from ebay i would request a refund. Also, didn't someone offer you 2007 in your other thread?

Navigation

[0] Message Index

[#] Next page

[*] Previous page