Main > Monitor/Video Forum

Any good Arcade Monitor calibration procedure?

Pages: (1/1)

agalardi:

I have a 21" arcade monitor and I am far away from a good calibration. I tried a lot but I am not good at it.

It would be great if someone have a step by step calibration guide/procedure/instructions.

I would be perfect if it comes with some calibration images with some kind of scale. Something like: "step 4: open img4 and adjust red until you can see between X and Y"... and so on.

Maybe It is not possible to get a guide like this...  :dunno

behrmr:

Color balancing is always going to be subjective. The key is to get your black and white levels the way you like then go from there.  On Youtube, buffet has a decent video on how to color balance a Sanyo.  The process is very similar to all monitors (except Sanyo has 3 brightness controls) so you might want to take a look at that.  Start watching after he is done setting the B+.  Here's a link to it  https://youtu.be/HASKqAOwLms?t=790  There are other videos out there try searching for "how to color balance arcade monitor"

agalardi:

Thank you behrmr, I will try

Pages: (1/1)

Go to full version