Main > Monitor/Video Forum

How do I connect MVS 1-slot board to a tv?

Pages: (1/1)

dodathp113:

Hi everyone, I'm a newbie to this
I'm going to buy a MVS motherboard to build a custom cabinet. Then I realized that it output video in RGB-thing that I don't know. So is there any (cheap) way to connect the board to a consumer tv or monitor (CRT component is prefered, since I'm going to re-use one as a monitor)
Thank you very much

Paradroid:

--- Quote from: dodathp113 on October 15, 2019, 03:53:03 pm ---Hi everyone, I'm a newbie to this

--- End quote ---

How are your soldering skills?

I RGB-modded a TV and hooked up my one slot. Looks amazing.

Titchgamer:

A supergun is probably the easiest and cheapest method.

If you are good at soldering you could consoleise it.

Zebra:

For component video, you'll either need a supergun with component video out, a regular supergun plus a scart to component transcoder, or a jamma harness wired to a Jpak.

keilmillerjr:

There is the cbox you could try.

https://m.aliexpress.com/item/32850852119.html

Pages: (1/1)

Go to full version