| Main > Lightguns |
| GUN4IR - The Ultimate 4 Points Lightgun System |
| << < (188/227) > >> |
| agent_c:
Has anyone converted the gun con 2's by using samco's replacement board and then using Jaybee's 4 point ir/software? I just managed to get two gun con 2 guns for £10 and would like the simplicity of putting in the board from Samco as it will be easier and better internally with the arduino mounted and all the wiring neat and tidy, I was going to use a "the real arcade" jolt gun (another £10 buy) to convert but the gun con2 looks like a better option to me, especially as I will have two of them. |
| JayBee:
--- Quote from: agent_c on December 12, 2021, 05:59:42 am ---Has anyone converted the gun con 2's by using samco's replacement board and then using Jaybee's 4 point ir/software? I just managed to get two gun con 2 guns for £10 and would like the simplicity of putting in the board from Samco as it will be easier and better internally with the arduino mounted and all the wiring neat and tidy, I was going to use a "the real arcade" jolt gun (another £10 buy) to convert but the gun con2 looks like a better option to me, especially as I will have two of them. --- End quote --- The Samco board pinout and mine are different, it won't work. But I'll sell drop in kits soon for the gcon1/2 if you are interested. |
| agent_c:
thanks, such a shame, it would have been perfect! |
| holmes:
--- Quote from: woordmand on November 13, 2021, 03:26:39 am ---I found the smallest second-hand IR sensing part, and the test was successful. The assembly has been completed. --- End quote --- Could you give a link or directions to find this? I bought the electronic components and spent some hours trying to solder the leds. I ended up with a very unreliable device. :-[ |
| woordmand:
--- Quote from: holmes on December 19, 2021, 12:07:21 pm --- --- Quote from: woordmand on November 13, 2021, 03:26:39 am ---I found the smallest second-hand IR sensing part, and the test was successful. The assembly has been completed. --- End quote --- Could you give a link or directions to find this? I bought the electronic components and spent some hours trying to solder the leds. I ended up with a very unreliable device. :-[ --- End quote --- This is a camera from China. Its price is not high, but the freight is too high. Can only find friends to buy together and share the freight. You need infrared LEDs, 3 LEDs and a resistor in series. I use a 25 Ω resistor, which smaller. |
| Navigation |
| Message Index |
| Next page |
| Previous page |