Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: ROWE Ami CD 100 jukebox will not allow me to enter numbers to play, help  (Read 2829 times)

0 Members and 1 Guest are viewing this topic.

Mary Lou

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:August 18, 2019, 01:19:56 pm
  • I want to build my own arcade controls!
ROWE Ami CD 100 jukebox will not allow me to enter numbers to play, help
« on: August 18, 2019, 01:17:28 pm »
I have replaced battery and did full initialization. Error code comes up 14-04. At one point I had message reading Priority 00. Cannot play CD
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: ROWE Ami CD 100 jukebox will not allow me to enter numbers to play, help
« Reply #1 on: August 18, 2019, 09:51:49 pm »
14-04 indicates factory defaults are requested to be manually loaded.
Logged

Karetaker

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 268
  • Last login:July 28, 2022, 08:19:40 pm
  • I want to build my own arcade controls!
Re: ROWE Ami CD 100 jukebox will not allow me to enter numbers to play, help
« Reply #2 on: September 09, 2019, 10:11:08 pm »
Put it into service mode with the service switch. Turn off power to the jukebox with the power switch. Hold down the 1 & 0 on the keypad. Turn the power switch back on and wait until the display reads defaults loaded. Then you can release the 1 & 0. You may have to initialize the CD's again.
Logged
Pages: [1]
  
Go Up
« previous next »