Arcade Collecting > Miscellaneous Arcade Talk

looking for unstupids ms pacman cocktail table plans for cnc

(1/3) > >>

abispac:
As the tittle says, i just restored a supercobra cocktail table and converted it to a retropie game and it came out good, now i would really like to get one for myself so here at my city there is a guy that charges me 45 dlls to cnc any 4x8 plywood , so i really really would apreciate if someone has those files for cnc ready, that would be awesome, thanks for any help . Unstupid site is down and he hasn't logged in in a year or more. So hope someone can help, thanks.

PL1:

--- Quote from: abispac on August 23, 2019, 08:51:48 pm ---As the tittle says, i just restored a supercobra cocktail table and converted it to a retropie game and it came out good, now i would really like to get one for myself so here at my city there is a guy that charges me 45 dlls to cnc any 4x8 plywood , so i really really would apreciate if someone has those files for cnc ready, that would be awesome, thanks for any help . Unstupid site is down and he hasn't logged in in a year or more. So hope someone can help, thanks.

--- End quote ---

Are you talking about this file?

--- Quote from: Unstupid on April 11, 2012, 04:29:48 pm ---You can download the MCX file here...  http://www.unstupid.com/myfiles/MsPacCocktail.zip
A few notes:

- There is no table top piece.  That was cut separately on a 1" piece of ply.  Although there is space for the tabletop on this sheet if you are ok with it being 3/4" thick
There are 5 tool changes.
1- 1/8" flat bit to drill bolt holes for the vents and speaker grills also to cut out the C14 receptacle.
2- 1/4" chamber bit to scribe the lines where i need to drill 3/8" holes with the doweling jig in the side of the plywood
3- 1/4" flat bit drill out the 3/8" holes for the dowels (using a helix bore toolpath)
4- 3/8" compression bit to cut the holes, coindoor and finally the panel edges
5- 1/8" flat to clean up the inside radiuses on any internal 90degree cuts.

--- End quote ---

Archive.org has it.   :cheers:
https://web.archive.org/web/20160815000339/http://www.unstupid.com/myfiles/MsPacCocktail.zip


Scott

abispac:
 :burgerking: that's the one, thanks slot man

javeryh:

--- Quote from: abispac on August 24, 2019, 01:21:16 pm --- :burgerking: that's the one, thanks slot man

--- End quote ---

Did this work?  Did you ever get these plans cut and assembled?

Mike A:
Are you sure you want to ask sir hacks-a-lot for his input?

Navigation

[0] Message Index

[#] Next page