| Main > Lightguns |
| Aimtrak lightguns messing up Controller IDs |
| (1/5) > >> |
| darthclem:
In my ongoing struggles to get my upgraded arcade cabinet running, I managed to get my joystick ID situation worked out, but when I went to install my Aimtrak lightguns, things got screwed up again. It took me a while to figure out what was going on, but as I installed each of my two guns, it pushed the controller IDs of each of my UltraStiks up by 1 (so controller 1 became controller 3, and controller 2 became controller 4). The IDs didn't change in UltraMap or under Windows USB devices -- but they did within Hyperspin and my emulators. I tried changing the lightgun IDs in the AimTrak software, but that didn't make any difference. If I unplug both lightguns, my UltraStiks go back to their proper IDs. Has anyone else run into this? If so, how did you solf it? |
| Titchgamer:
Its caused by windows reassigning the controller ID's. Look in the lightgun forum this has been covered many times :) |
| darthclem:
Oops, my bad. I don't want to be "that guy" who continues a thread in the wrong forum, but it seems that my lightgun issue (as well as the other post I made that probably doesn't belong in this forum on my Joystick 1 and 2 swapping) have to do with Windows USB remapping. Given that, is the Lightgun forum still the best place to look for answers, or a different forum? If you have any advice on search terms, that would be great, as I'm struggling to find a post with the solution. I thought ControllerRemap might be what I was looking for, but that appears to be MAME specific and I need my Joystick IDs to be stable for all of my emulators. Thanks! |
| Titchgamer:
I use Tur to fix my ID’s so I would start with that :) |
| darthclem:
Somehow I figured out the combination of IDs to assign within the Ultimarc mapping and Aimtrak software to get the controllers to fall into order. Stick 1 is labeled Stick 2, Stick 2 is labeled Stick 3, Gun 1 is labeled gun 3, and Gun 2 is labeled gun 4. I still snagged Tur, though, because I'd prefer to have everything labeled properly. Thanks a ton for your help! |
| Navigation |
| Message Index |
| Next page |