Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Arcade 1UP Terminator 2 guns on a Midway T2 arcade?  (Read 560 times)

0 Members and 1 Guest are viewing this topic.

3DPiper

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:November 10, 2023, 04:22:58 pm
  • I want to build my own arcade controls!
Arcade 1UP Terminator 2 guns on a Midway T2 arcade?
« on: November 08, 2023, 08:15:59 pm »
Can you use Arcade 1UP Terminator 2 guns on a Midway T2 arcade?
I know the innards will not be the same, but is the size/shape of the Arcade 1UP close enough?
I was modeling my own to 3D Print, but if the Arcade 1UPs can be modified it may be easier to start with their shell.

purbeast

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 92
  • Last login:March 26, 2024, 07:28:13 pm
Re: Arcade 1UP Terminator 2 guns on a Midway T2 arcade?
« Reply #1 on: November 09, 2023, 03:23:17 pm »
Not a chance. The A1up ones are tiny.  They are not really the same either.  The arcade guns are really just a "joysticks" with a gun mounted on top of them and moving the gun repositions the underlying "joystick".  It's not even a light gun game.

3DPiper

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:November 10, 2023, 04:22:58 pm
  • I want to build my own arcade controls!
Re: Arcade 1UP Terminator 2 guns on a Midway T2 arcade?
« Reply #2 on: November 10, 2023, 04:22:58 pm »
Thanks for the info!
My main interest was if they were the same size..
If they aren't then no way, I'll just finish modeling the one I have and 3D Print a new one