Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: D9200 saving settings issue  (Read 1074 times)

0 Members and 1 Guest are viewing this topic.

vargas14617

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:February 14, 2024, 02:56:54 pm
  • Don't push the Red button! I pushed the Red button
D9200 saving settings issue
« on: June 17, 2019, 07:59:27 am »
I have a d9200 that was recently serviced. When i turn it on in my mame cabinet the image is a little small so i hold down down and select and change the default settings and save. It says its changing factory settings but when I restart it small again.  If i go in and elect default it goes the right size.  What am I doing wrong.  How do it make setting changes that will go into effect when i power up the mont?

Mr. Peabody

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 810
  • Last login:November 05, 2019, 02:30:42 pm
Re: D9200 saving settings issue
« Reply #1 on: June 17, 2019, 05:36:30 pm »
Take it back to the repair person.

vargas14617

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:February 14, 2024, 02:56:54 pm
  • Don't push the Red button! I pushed the Red button
Re: D9200 saving settings issue
« Reply #2 on: June 17, 2019, 07:32:43 pm »
I want to make sure the steps i am taking are correct to set the settings before i try that.

Mr. Peabody

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 810
  • Last login:November 05, 2019, 02:30:42 pm
Re: D9200 saving settings issue
« Reply #3 on: June 19, 2019, 05:49:48 pm »
Settings saving is automatic.