Software Support > GroovyMAME
How To Adjust Individual Games Resolution?
FrizzleFried:
SOLUTION FOUND! After reading haynor's post I figured I'd check the chassis out to see if there were any pots I had missed (I did look prior). In addition to the 6 pots that had been wired to a remote board ... which I had obviously adjusted prior... there is a horizontal hold pot on the chassis as well as another one that is hot glued that adjusts when HV shutdown happens. Disappointed I took a look at the cap-map of the board searching for anything I missed. I saw nothing. I then went back to the chassis and really examined it and found ANOTHER POT... tucked just behind the Horizontal Hold. It was a flush mounted pot versus a vertical standing one like the Horizontal Hold. I checked the cap map and sure enough, there it was... labeled "50/60"...
I had no sure way of knowing what a 50/60 pot does though I suspected it was JUST WHAT I WAS LOOKING FOR... an adjustment for between 50 & 60 hz... but I'd never seen a chassis with one of those... could it be?
Sure enough... that is EXACTLY what it is!
I was able to adjust out the curl at the bottom and the damn monitor looks the best it's ever looked!
Has anyone ever noticed a 50/60 pot on their K7000? Is that the only chassis that has that? I learn something new every day.
Calamity:
Nice finding!
Once you find the thread to pull from, it looks like an user posted about the same pot 16 years ago:
http://forum.arcadecontrols.com/index.php?topic=13643.0
hurdy:
I have a board that has sound and a garbled picture. Any suggestion on where to start troubshooting?
Navigation
[0] Message Index
[*] Previous page
Go to full version