Author Topic: sony trinitron wega kv-21fs140. config for crtemudrivers needed (Read 1001 times)

Pappajhons · « **on:** June 09, 2019, 04:33:32 pm »

my arcade build has this tv which i conect to a pc via component with a retrotek: vga to component converter.

i have tried many times with the preset configts that the video tools come wit, but i cant really get it right with the resolution. I wish i could get it down to 240p but seems imposible because when i try to, it glitches out.

any suggestions for resolution and frequency?

yo1dog · « **Reply #1 on:** June 10, 2019, 07:16:45 pm »

I had a very similar TV and the same question. Thread: http://forum.arcadecontrols.com/index.php/topic,157000.msg1649523.html#msg1649523

First thing I would do is test with the NTSC/PAL preset (depending on where you live) as it is the most restrictive and should defiantly work with any consumer TV.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: sony trinitron wega kv-21fs140. config for crtemudrivers needed (Read 1001 times)

Pappajhons

sony trinitron wega kv-21fs140. config for crtemudrivers needed

yo1dog

Re: sony trinitron wega kv-21fs140. config for crtemudrivers needed