Main > Main Forum
Super Pang Jamma pcb no keyway
CHRIS-F:
--- Quote from: Titchgamer on June 01, 2019, 07:43:49 am ---Cant say I had found that, All the dip setting sheets I found for pang bootlegs were only 6 dips so I will give that a try next time I fire it up.
--- End quote ---
Yeah! I tried those monster world dips earlier they are correct, but they are the wrong way around,
DIP 1 Sounds in demo mode dip off=sound on dip on= sound off (weird)
DIPS 2/3 Difficulty on-on= easy on-off=hard off-off=hardest off-on=normal
DIPS 4/5 Lives on-on 1 life off-on= 2 lives on-off 3=lives off-off 4 lives
DIPS 6/8 Coinage similar to monser world
I haven't checked the coinage exactly, but for normal difficulty mode, 4 credits per coin and 4 lives per credit and sound during demo mode try these dip settings;
off, off,on, off,off, on,off,off
Titchgamer:
--- Quote from: CHRIS-F on June 18, 2019, 05:57:32 pm ---
--- Quote from: Titchgamer on June 01, 2019, 07:43:49 am ---Cant say I had found that, All the dip setting sheets I found for pang bootlegs were only 6 dips so I will give that a try next time I fire it up.
--- End quote ---
Yeah! I tried those monster world dips earlier they are correct, but they are the wrong way around,
DIP 1 Sounds in demo mode dip off=sound on dip on= sound off (weird)
DIPS 2/3 Difficulty on-on= easy on-off=hard off-off=hardest off-on=normal
DIPS 4/5 Lives on-on 1 life off-on= 2 lives on-off 3=lives off-off 4 lives
DIPS 6/8 Coinage similar to monser world
I haven't checked the coinage exactly, but for normal difficulty mode, 4 credits per coin and 4 lives per credit and sound during demo mode try these dip settings;
off, off,on, off,off, on,off,off
--- End quote ---
Thanks for that info! I am getting my gun out tomorrow to test some new boards I have picked up so I will give these a try at the same time :)
CHRIS-F:
--- Quote from: Titchgamer on June 18, 2019, 07:23:12 pm ---Thanks for that info! I am getting my gun out tomorrow to test some new boards I have picked up so I will give these a try at the same time :)
--- End quote ---
I think these are correct now, not to sure about the difficulty settings though as I can't see any difference between easy hard etc :-)
Titchgamer:
--- Quote from: CHRIS-F on June 27, 2019, 06:07:25 pm ---
--- Quote from: Titchgamer on June 18, 2019, 07:23:12 pm ---Thanks for that info! I am getting my gun out tomorrow to test some new boards I have picked up so I will give these a try at the same time :)
--- End quote ---
I think these are correct now, not to sure about the difficulty settings though as I can't see any difference between easy hard etc :-)
--- End quote ---
Good stuff :)
FrizzleFried:
FWIW ... you can usually remove the key from an edge connector simply by pulling it out with a pair of needle nose pliers...