Super Pang Jamma pcb no keyway

Main > Main Forum

<< < (3/4) > >>

CHRIS-F:

--- Quote from: Titchgamer on June 01, 2019, 07:43:49 am ---Cant say I had found that, All the dip setting sheets I found for pang bootlegs were only 6 dips so I will give that a try next time I fire it up.

--- End quote ---

Yeah! I tried those monster world dips earlier they are correct, but they are the wrong way around,

DIP 1 Sounds in demo mode dip off=sound on dip on= sound off (weird)
DIPS 2/3 Difficulty on-on= easy on-off=hard off-off=hardest off-on=normal
DIPS 4/5 Lives on-on 1 life off-on= 2 lives on-off 3=lives off-off 4 lives
DIPS 6/8 Coinage similar to monser world

I haven't checked the coinage exactly, but for normal difficulty mode, 4 credits per coin and 4 lives per credit and sound during demo mode try these dip settings;
off, off,on, off,off, on,off,off

Titchgamer:

--- Quote from: CHRIS-F on June 18, 2019, 05:57:32 pm ---
--- Quote from: Titchgamer on June 01, 2019, 07:43:49 am ---Cant say I had found that, All the dip setting sheets I found for pang bootlegs were only 6 dips so I will give that a try next time I fire it up.

--- End quote ---

Yeah! I tried those monster world dips earlier they are correct, but they are the wrong way around,

DIP 1 Sounds in demo mode dip off=sound on dip on= sound off (weird)
DIPS 2/3 Difficulty on-on= easy on-off=hard off-off=hardest off-on=normal
DIPS 4/5 Lives on-on 1 life off-on= 2 lives on-off 3=lives off-off 4 lives
DIPS 6/8 Coinage similar to monser world

I haven't checked the coinage exactly, but for normal difficulty mode, 4 credits per coin and 4 lives per credit and sound during demo mode try these dip settings;
off, off,on, off,off, on,off,off

--- End quote ---

Thanks for that info! I am getting my gun out tomorrow to test some new boards I have picked up so I will give these a try at the same time :)

CHRIS-F:

--- Quote from: Titchgamer on June 18, 2019, 07:23:12 pm ---Thanks for that info! I am getting my gun out tomorrow to test some new boards I have picked up so I will give these a try at the same time :)

--- End quote ---

I think these are correct now, not to sure about the difficulty settings though as I can't see any difference between easy hard etc :-)

Titchgamer:

--- Quote from: CHRIS-F on June 27, 2019, 06:07:25 pm ---
--- Quote from: Titchgamer on June 18, 2019, 07:23:12 pm ---Thanks for that info! I am getting my gun out tomorrow to test some new boards I have picked up so I will give these a try at the same time :)

--- End quote ---

I think these are correct now, not to sure about the difficulty settings though as I can't see any difference between easy hard etc :-)

--- End quote ---

Good stuff :)

FrizzleFried:
FWIW ... you can usually remove the key from an edge connector simply by pulling it out with a pair of needle nose pliers...

Navigation

 Message Index

Go to full version