Author Topic: Need a PSU for a supergun. (Read 2521 times)

Titchgamer · « **on:** April 21, 2019, 02:51:32 pm »

Hey guys, Looking for some ideas or recommendations for a PSU for a supergun I am planning on building.

I am using one of these as a base: http://retroelectronik.com/en/supergun/145-supergun-progamer-arcade-jamma-autofirevoltmeter-included-5674864654514.html

And I am planning on building it into a case complete with a PSU etc.

It says it needs a 20/24pin ATX supply or a arcade PSU but I was thinking of using a ATX supply.

But my question is really does anyone know of a decent small form factor PSU that would be good for this purpose as I want to keep the size of the unit down.

Any pointers appreciated


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Need a PSU for a supergun. (Read 2521 times)

Titchgamer

Need a PSU for a supergun.