| Main > Everything Else |
| Vending Machine Blues |
| (1/1) |
| SCking:
The company I work for is more of an amusement operator, (pool tables, jukebox, arcades) but we have 2-3 vendors on route. Leads to my problem... I have a Crane-National Vendor model “147”. 115 volt, 60 hertz, single phase, amps 3. With a mars electronic coin changer model TRC-6000. 115 VDC. And a mars bill acceptor model AE 2651 U5. 115 VAC. My problem is that I’m putting chips, gum, cigs, lighters, just a bunch different stuff at different prices. Now if I insert only 1$ bills I can insert up to 15 of them (highest priced item) no problem. But if at any point, I put a 5$ Bill (or larger) the bill acceptor stops accepting money, and is waiting to vend something before stacking the bill. How can I make this thing accept say, two 1$ bills then one 5$ bill, then one more1$ (8$= price for a pack of cigs) ?????? I’ve been flipping dip switches and attempting to change machine/bill acceptor configuration for 2 days now. It’s driving me mad!!! I don’t have a owners manual, found one on line the reads like Latin to me. Any and all help is very appreciated!!! Thank you in advance |
| Ken Layton:
The Mars TRC6000 changer is old. I believe it was replaced by a newer model which does more modern pricing. This site has a manual: https://www.vend-resource.com/book/mei-mars-trc-series-6000-6010-6510-6512-6800-coin-mech-opreation-and-service-manual Wachtor Electronics is a Mars tech support/service center. Suggest talking to someone there for advise with your particular setup. https://www.wachtor.com/home.html |
| SCking:
Hey Ken, thanks for your input. I don’t have any spare or more up to date changers.... but I’ll check that site out and see if I can figure something out. Thanks!! Sent from my iPhone using Tapatalk |
| Navigation |
| Message Index |