Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: inverter board source for megatouch rx monitors  (Read 3310 times)

0 Members and 1 Guest are viewing this topic.

mickster150

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:March 25, 2019, 04:59:34 pm
  • I want to build my own arcade controls!
inverter board source for megatouch rx monitors
« on: March 25, 2019, 04:59:34 pm »
I have a megatouch rx with a dead screen.  Is there a source for inverter pcbs for this particular monitor?

Just hoping to revive yet another broken megatouch!

thanks,
mickey

lilshawn

  • Moderator
  • Trade Count: (+3)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7377
  • Last login:Yesterday at 07:40:39 pm
  • I break stuff...then fix it...sometimes
Re: inverter board source for megatouch rx monitors
« Reply #1 on: March 26, 2019, 01:23:11 am »
Original boards are stupid expensive. You can order them from Ami I believe.

You can find a redesigned replacement from lcdparts.net they are kinda stupid expensive there too.

I personally buy universal invertor from ebay, wire them in (the lvds board has the pinout silkscreened on the board connector)  and just double sided tape them on the outer side of the monitor (inside is not enough room.)