Author Topic: Galaga-Tully caberet (Read 17997 times)

yotsuya · « **Reply #40 on:** March 14, 2019, 08:20:43 am »

Janky as hell, but I love it!

thomas_surles · « **Reply #41 on:** March 14, 2019, 09:42:38 am »

Quote from: yotsuya on March 14, 2019, 08:20:43 am

Janky as hell, but I love it!

Function>style

yotsuya · « **Reply #42 on:** March 14, 2019, 09:44:15 am »

If you ever want to “upgrade”, let me know and I’ll 3D print you some

thomas_surles · « **Reply #43 on:** March 14, 2019, 09:45:32 am »

Quote from: yotsuya on March 14, 2019, 09:44:15 am

If you ever want to “upgrade”, let me know and I’ll 3D print you some

I'm in. Was gonna ask before if someone would print me some.

yotsuya · « **Reply #44 on:** March 14, 2019, 10:01:46 am »

Quote from: thomas_surles on March 14, 2019, 09:45:32 am

Quote from: yotsuya on March 14, 2019, 09:44:15 am
If you ever want to “upgrade”, let me know and I’ll 3D print you some
I'm in. Was gonna ask before if someone would print me some.

PM me your mailing address. I finally HAVE a chance to stop at the post office tomorrow to send some stuff out, so I’ll send you some to have for the next project.

thomas_surles · « **Reply #45 on:** March 14, 2019, 10:41:21 am »

Quote from: yotsuya on March 14, 2019, 10:01:46 am

Quote from: thomas_surles on March 14, 2019, 09:45:32 am
Quote from: yotsuya on March 14, 2019, 09:44:15 am
If you ever want to “upgrade”, let me know and I’ll 3D print you some
I'm in. Was gonna ask before if someone would print me some.

PM me your mailing address. I finally HAVE a chance to stop at the post office tomorrow to send some stuff out, so I’ll send you some to have for the next project.

Good lookin out

wp34 · « **Reply #46 on:** March 14, 2019, 11:00:05 am »

Quote from: thomas_surles on March 13, 2019, 09:20:32 pm

I rigged up my own any coin mech.

Nice! I've been thinking of doing something similar with my Fix-it-Felix. I bought the ones from Any Coin but for some reason can't get them to work reliably with my Nintendo coin door. They work great in my other machines.

jdbailey1206 · « **Reply #47 on:** March 14, 2019, 11:39:54 am »

Please get them 3D printed. It will do Tully proud.

Nephasth · « **Reply #48 on:** March 14, 2019, 08:55:54 pm »

Quote from: yotsuya on March 14, 2019, 10:01:46 am

Quote from: thomas_surles on March 14, 2019, 09:45:32 am
Quote from: yotsuya on March 14, 2019, 09:44:15 am
If you ever want to “upgrade”, let me know and I’ll 3D print you some
I'm in. Was gonna ask before if someone would print me some.

PM me your mailing address. I finally HAVE a chance to stop at the post office tomorrow to send some stuff out, so I’ll send you some to have for the next project.

yotsuya · « **Reply #49 on:** March 14, 2019, 11:17:21 pm »

Quote from: Nephasth on March 14, 2019, 08:55:54 pm

Quote from: yotsuya on March 14, 2019, 10:01:46 am
Quote from: thomas_surles on March 14, 2019, 09:45:32 am
Quote from: yotsuya on March 14, 2019, 09:44:15 am
If you ever want to “upgrade”, let me know and I’ll 3D print you some
I'm in. Was gonna ask before if someone would print me some.

PM me your mailing address. I finally HAVE a chance to stop at the post office tomorrow to send some stuff out, so I’ll send you some to have for the next project.

Yeah, ---smurfette---, I know. You’re on that list.

thomas_surles · « **Reply #50 on:** March 15, 2019, 03:37:50 pm »

stpcore is hooking me up again! Super excited. Thanks again Ken.

Here's the art files until my link dies if anyone wants them
https://app.box.com/s/5mcn48oik4pkl75e42tz6k5mx9kybaw0

thomas_surles · « **Reply #51 on:** March 17, 2019, 12:25:52 am »

Got a template printed and the holes drilled.

javeryh · « **Reply #52 on:** March 17, 2019, 11:06:36 am »

Looks great. I may have missed it but are you installing a dynamic marquee above the coin door?

thomas_surles · « **Reply #53 on:** March 17, 2019, 11:19:06 am »

Quote from: javeryh on March 17, 2019, 11:06:36 am

Looks great. I may have missed it but are you installing a dynamic marquee above the coin door?

I really considered it. But I settled on a standard galaga marquee.

thomas_surles · « **Reply #54 on:** March 17, 2019, 11:51:53 am »

Paint is coming up. Is rustoleum satin black the way to go? Oil base? Foam trim roller?

thomas_surles · « **Reply #55 on:** March 28, 2019, 09:33:20 pm »

I didn't find satin black so I went with the semi gloss. Looks really good in person. Used little cabinet rollers and a trim brush. Artwork should be at the door soon. I suppose I better cobble up something that can play galaga.

Nephasth · « **Reply #56 on:** March 29, 2019, 08:49:57 am »

Love me some semi-gloss.

javeryh · « **Reply #57 on:** March 29, 2019, 10:39:00 am »

Looking good! These little cabs are so inviting... really tempted to make something like this my next build but wifey will kill me.

Mike A · « **Reply #58 on:** March 29, 2019, 11:09:22 am »

Would you like me to talk to her?

I helped a friend get a pool table into his living room. That was a tense negotiation.

wp34 · « **Reply #59 on:** March 29, 2019, 11:17:31 am »

Looks great man. It is all down-hill after the paint is dry!

thomas_surles · « **Reply #60 on:** April 13, 2019, 01:34:43 pm »

Gonna put this on the finished pile. Running attract mode.

meltman · « **Reply #61 on:** April 13, 2019, 07:07:51 pm »

That little machine is wonderful!

Looks great man. I love it.

wp34 · « **Reply #62 on:** April 13, 2019, 07:25:57 pm »

That turned out great. It looks like it came from the factory. The CRT really completes it too.

Wish I worked as fast as you.

Arroyo · « **Reply #63 on:** April 13, 2019, 08:13:03 pm »

Start to finish in under one month......you are my hero. I need lessons in efficiency.

Turned out great, nice work I really like the way you incorporated the art feels like it’s a full stand up.

Mike A · « **Reply #64 on:** April 13, 2019, 08:52:10 pm »

I love it. Nice work.

Malenko · « **Reply #65 on:** April 13, 2019, 09:24:44 pm »

Dude! You win a MAMEy!

yotsuya · « **Reply #66 on:** April 14, 2019, 12:45:55 am »

Good job man!

Nephasth · « **Reply #67 on:** April 14, 2019, 01:38:39 am »

I like it!

Now go buy some black card stock and make yourself a monitor bezel!

thomas_surles · « **Reply #68 on:** April 14, 2019, 08:44:37 am »

Thanks guys

Quote from: Nephasth on April 14, 2019, 01:38:39 am

I like it!

Now go buy some black card stock and make yourself a monitor bezel!

Absolutely. Needs something

javeryh · « **Reply #69 on:** April 14, 2019, 09:19:05 am »

Quote from: Arroyo on April 13, 2019, 08:13:03 pm

Start to finish in under one month......you are my hero.

Mine too. What an awesome little machine.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news