Main > Raspberry Pi & Dev Board

Servo Stik and RP3

(1/2) > >>

DetroitKP:
Hi.  Iím attempting my first RP Mame build.  Iím interested in this joystick with powered restrictor from 4-way to 8-way.  Any idea whether the RP will have enough power to operate?  What about programming?  Thanks!

http://www.ultimarc.com/servostik.html

J_K_M_A_N:
Check out this tutorial.

https://andrewdupont.net/2017/04/10/nostalgia-tron-part-1/

Part 8 should have a bunch of info that is very helpful for what you want to do. I was going to possibly try and use this same thing on my next build.

J_K_M_A_N

DetroitKP:

--- Quote from: J_K_M_A_N on February 10, 2019, 09:23:55 am ---Check out this tutorial.

https://andrewdupont.net/2017/04/10/nostalgia-tron-part-1/

Part 8 should have a bunch of info that is very helpful for what you want to do. I was going to possibly try and use this same thing on my next build.

J_K_M_A_N

--- End quote ---

Thanks man!  :cheers:

ZoOl007:
You can download a servostik switcher on my site.

javeryh:

--- Quote from: ZoOl007 on February 11, 2019, 12:06:20 pm ---You can download a servostik switcher on my site.

--- End quote ---

This awesome.  Thanks so much for this.  Been looking for an "easy" solution and assuming I can install the program on my pi this looks like the way to go.  I don't need the RGB stuff (for now) so I'll just grab the "SetServoStik" file for now.  I was looking at the tutorial posted above but seems a bit out of my comfort zone.

Navigation

[0] Message Index

[#] Next page

Go to full version