Main > Project Announcements
720 Atari Cabaret
processedmeat:
I first just used a gel stain so that I could stain it while the cabinet was upright but it came out really blotchy. I had to then sand it all down and try again. The second time I used a wood conditioner and then the gel stain and it definitely came out better.
The 19" CRT monitor barely fits in there horizontally.
Finally, to give the joystick the most clearance from the monitor glass, I had to route out a notch in the wood just right above the marquee.
processedmeat:
--- Quote from: yotsuya on January 31, 2019, 07:52:43 pm ---Although I think you’re on the right track, but the way you stretched out the cassettes already is a turn off.
--- End quote ---
How's this?
Drnick:
Make the Right hand tape Side B :) Definitely heading in the right direction.
meyer980:
I think drnick has a good idea. It could look like the attached!
processedmeat:
--- Quote from: meyer980 on February 01, 2019, 03:22:46 pm ---I think drnick has a good idea. It could look like the attached!
--- End quote ---
Thanks. Made the changes on my original!
Any other thoughts?