Author Topic: CRT Emudriver 2.0 - Slightly Shifted Image (Read 2318 times)

superbike81 · « **on:** February 17, 2019, 12:45:59 am »

Just finished my GroovyMame setup, and in Windows and MAME and just the image in general in shifted about an inch to the right. I can't find anywhere in software to shift the image over. I saw suggestions to get into the TV service menu and shift the image, but everything else that is connected to it is perfectly centered.

The connection goes from VGA into a converter box to component to the TV. I tested another VGA device on it and the image is centered, so it seems to be something in Windows itself, not any of the hardware.

Thoughts? Any ideas on how to fix this or things to check? Can I change something within GroovyMame?

Thanks!

Professor Jones · « **Reply #1 on:** February 17, 2019, 04:45:43 am »

Hey,

You can center the image by adjusting the monitor preset values, this thread should help you out : http://forum.arcadecontrols.com/index.php/topic,159464.0.html


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: CRT Emudriver 2.0 - Slightly Shifted Image (Read 2318 times)

superbike81

CRT Emudriver 2.0 - Slightly Shifted Image

Professor Jones

Re: CRT Emudriver 2.0 - Slightly Shifted Image