Author Topic: B&k 467 blows f1 fuse (Read 1527 times)

pigjes · « **on:** January 29, 2019, 03:51:41 pm »

Hi,

Recently bought a 467 rejuvenator on ebay, supposed to be working.
Arrived with a blown fuse F1. Resoldered all joints, new fuse.

Turning to setup, power goes on (g1+line volts also show on the meters) for 5 seconds and blows fuse again.
Heater voltage is still working and adjustable, but power light is now off and no g1 or line voltage anymore.

Who has some tips on what to check or measure first, since I am not that good in reading schematics.

Thanks!

Ken Layton · « **Reply #1 on:** October 16, 2020, 11:20:00 am »

A bit late, but the 467 manuals and repair logs are now located here:

https://sites.google.com/site/mtpacifico/mikes_arcade/kens_korner


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: B&k 467 blows f1 fuse (Read 1527 times)

pigjes

B&k 467 blows f1 fuse

Ken Layton

Re: B&k 467 blows f1 fuse