Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Wells Gardner D9400 vertical is off. Looking for help  (Read 4534 times)

0 Members and 1 Guest are viewing this topic.

vargas14617

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:February 14, 2024, 02:56:54 pm
  • Don't push the Red button! I pushed the Red button
Wells Gardner D9400 vertical is off. Looking for help
« on: August 01, 2019, 09:25:13 pm »
Just purchased a americas army arcade. When i got home the image shifted down and I dont know what to do. 

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6173
  • Last login:Today at 12:35:44 pm
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #1 on: August 02, 2019, 12:03:18 am »
have you tried to adjust the picture using the remote board, its normally inside the coin door to one side on some velcro

vargas14617

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:February 14, 2024, 02:56:54 pm
  • Don't push the Red button! I pushed the Red button
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #2 on: August 02, 2019, 06:16:30 am »
Thank you for the reply. Yes this is with the adjustment at 100 max.  Won’t go up anymore

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6173
  • Last login:Today at 12:35:44 pm
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #3 on: August 02, 2019, 06:27:18 am »
i don't think the yoke has dropped otherwise you would have purity and convergence issues

maybe try factory mode, to enter the factory menu turn the monitor off. Hold the buttons 'OSD' and 'Key +' and turn it on- i think this is correct, its been a long time since i did this

vargas14617

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:February 14, 2024, 02:56:54 pm
  • Don't push the Red button! I pushed the Red button
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #4 on: August 02, 2019, 07:49:01 am »
Thanks will try when i get home from work

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6173
  • Last login:Today at 12:35:44 pm
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #5 on: August 02, 2019, 09:46:08 am »
you do have one other option if that don't work- connect a keyboard and mouse, once game has booted press windows key and then shut down gvr then mouse right click the screen anywhere and use nvidia settings to adjust it

vargas14617

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:February 14, 2024, 02:56:54 pm
  • Don't push the Red button! I pushed the Red button
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #6 on: August 04, 2019, 09:45:50 pm »
i don't think the yoke has dropped otherwise you would have purity and convergence issues

maybe try factory mode, to enter the factory menu turn the monitor off. Hold the buttons 'OSD' and 'Key +' and turn it on- i think this is correct, its been a long time since i did this
I got into this menu but it did not help.  Do you know where I can get the default numbers because I messed up the sides.  I don't think its a collapse because the bottom goes beyond the screen. the other suggestion did not work.  I appreciate your help.  any other suggestions?

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6173
  • Last login:Today at 12:35:44 pm
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #7 on: August 05, 2019, 01:55:44 am »
there are aren't any default numbers as such, how did you mess the sides up unless you restored factory settings which is not the same as accessing factory menu

accessing factory menu gives you more adjustments and greater ranges

anyway post a photo of a screen shot and i can tell you what to adjust

vargas14617

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:February 14, 2024, 02:56:54 pm
  • Don't push the Red button! I pushed the Red button
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #8 on: August 05, 2019, 09:22:34 pm »
there are aren't any default numbers as such, how did you mess the sides up unless you restored factory settings which is not the same as accessing factory menu

accessing factory menu gives you more adjustments and greater ranges

anyway post a photo of a screen shot and i can tell you what to adjust
So this is what the picture looks like now. I reduced it to show the sides
« Last Edit: August 05, 2019, 09:24:21 pm by vargas14617 »

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6173
  • Last login:Today at 12:35:44 pm
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #9 on: August 06, 2019, 01:41:27 am »
so that looks simple enough to me

trapezoid
pincushion
vertical shift
vertical size
horizontal size

vargas14617

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:February 14, 2024, 02:56:54 pm
  • Don't push the Red button! I pushed the Red button
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #10 on: August 06, 2019, 08:02:34 am »
Thanks for quick reply. Will give it a try

vargas14617

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:February 14, 2024, 02:56:54 pm
  • Don't push the Red button! I pushed the Red button
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #11 on: August 06, 2019, 10:48:21 pm »
so that looks simple enough to me

trapezoid
pincushion
vertical shift
vertical size
horizontal size

Thanks worked. Just still have to figure out original problem

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6173
  • Last login:Today at 12:35:44 pm
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #12 on: August 07, 2019, 02:37:13 am »
do the vertical size and vertical shift both work

vargas14617

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:February 14, 2024, 02:56:54 pm
  • Don't push the Red button! I pushed the Red button
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #13 on: August 07, 2019, 06:19:00 am »
do the vertical size and vertical shift both work
yes the vertical size increases size but mostly the bottom of image just keeps going down. Shift moves imGe up or down and maxes at 100 but does not reach top.

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6173
  • Last login:Today at 12:35:44 pm
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #14 on: August 07, 2019, 12:45:41 pm »
its possible there may be an issue in the vertical deflection circuit

what happens if you adjust vertical linearity?

vargas14617

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:February 14, 2024, 02:56:54 pm
  • Don't push the Red button! I pushed the Red button
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #15 on: August 07, 2019, 09:37:37 pm »
its possible there may be an issue in the vertical deflection circuit

what happens if you adjust vertical linearity?
How do i do that?

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6173
  • Last login:Today at 12:35:44 pm
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #16 on: August 08, 2019, 03:35:03 am »
its possible there may be an issue in the vertical deflection circuit

what happens if you adjust vertical linearity?
How do i do that?

like i said it years since i adjusted one but i think its first left second line down on the factory menu

vargas14617

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:February 14, 2024, 02:56:54 pm
  • Don't push the Red button! I pushed the Red button
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #17 on: August 09, 2019, 08:17:40 am »
Thank you. 

vargas14617

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:February 14, 2024, 02:56:54 pm
  • Don't push the Red button! I pushed the Red button
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #18 on: October 02, 2019, 09:18:39 pm »
Was told today that its not deflection. They think its software. Is that possible? 

Mr. Peabody

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 810
  • Last login:November 05, 2019, 02:30:42 pm
Re: Wells Gardner D9400 vertical is off. Looking for help
« Reply #19 on: October 05, 2019, 04:29:48 pm »
You have a weird image there. Like a piece of paper curved on itself in the upper area. That alone suggests hardware to me. That is displays it the bios screen says more so.