I'm in the process of building my control panel and I've hit a bit of a conundrum...
I have the bottom three sides built and connected and the top panel ready to connect.... (see pic)
The control panel box is going to have a Vinyl wrap the whole way around (well, 80% of the way around, I'm not worried about the back)
Now, I have a few issues at this stage:
1) I can get all the pieces through the holes I have there, but it's tight, and I'm not convinced I'll get enough torque to actually do up screws etc with the box fully constructed, so I'd like to prime, apply part of the vinyl and then connect up the controls prior to connecting the top piece
2) However, I want to sand and prime as one to make sure my contours are smooth
Obviously, you can't really screw and unscrew MDF, so while I have the brackets to connect it (in pic) and can make all the connection stages work by carefully selecting which of those is pre connected to ensure screwdriver can fit in the others, I'm thinking I need some other way of connecting that can be undone and re-done at will. And this is where I'm stumped.
TL;DR - is there some kind of fixing mechanism that works on right angled (or near right angled) pieces of wood that I may not know of or may not know what to google?!
I feel there must be something as I'm sure I've put together ikea units etc with parts that might solve this purpose, but my mind is blank and I can't imagine what I'd need to search for them!
Thanks in advance