Arcade Collecting > Merit/JVL Touchscreen

ION Games wont load

<< < (2/3) > >>

jokerz4fun:
Thanks guys for the help. Sadly I do not have the 2014 software I thought I found an ISO online but when I tried to install it, it said my security key wasn't the correct version.
I will try out another RAM stick,  I know they can cause a lot of issues. I had one go bad that threw a D-sub error. My god that one took me forever to figure out.

I'll take everything out tonight and run some tests. I have a backup IO, CPU, RAM, HD, and motherboard so I should be able to see what is causing this headache.

I'll keep you posted and let you know what I find. Thank you again.

jokerz4fun:
Well fellas it looks like I have an issue with the Asus motherboard.  You nailed it right on the head. I tried the older games again tonight and all of them worked. When I tried the 2014 or 2010 games it went blank. Should I change the motherboard or is there a fix for this? If I swap the MB out it will be with another Asus gold board.

I do have an Intel D945GCLF board to try its been sitting in my parts bin and I forgot all about it

lilshawn:
yeah the D945GCLF is the board used in the next model up RX machines.

jokerz4fun:
The only thing I'll have to change is the wiring harness. I think the ion harness I have now is a 20 pin and the Intel board is a 24 pin with another four pin for the processor.

mahkeymike:

--- Quote from: jokerz4fun on January 07, 2019, 05:48:44 pm ---The only thing I'll have to change is the wiring harness. I think the ion harness I have now is a 20 pin and the Intel board is a 24 pin with another four pin for the processor.

--- End quote ---

20 pin works fine. The other 4 pins are not needed. I have no idea why intel made that board with a 24 pin connector. Also, every WS Aurora ive seen still use Merits official 20 pin atx 300w psu.

Navigation

[0] Message Index

[#] Next page

[*] Previous page