April 24, 2024, 04:43:55 pm
Home
Help
Search
Login
Register
News:
Support this site
Shop
Amazon
through our link. Thank you!
Forum notices to gmail.com addresses are working. Microsoft addresses are still not.
The NEW Build Your Own Arcade Controls
|
Main
|
Monitor/Video Forum
|
Makvision D2929 pending failure
Main
Restorations
Software
Audio/Jukebox/MP3
Everything Else
Buy/Sell/Trade
Project Announcements
Monitor/Video
GroovyMAME
Merit/JVL Touchscreen
Meet Up
Retail Vendors
Driving & Racing
Woodworking
Software Support Forums
Consoles
Project Arcade
Reviews
Automated Projects
Artwork
Frontend Support Forums
Pinball
Forum Discussion
Old Boards
Raspberry Pi & Dev Board
controls.dat
Linux
Miscellaneous Arcade
Wiki Discussion
Old Archives
Lightguns
Arcade1Up
Try the site in https mode
Site News
Unread posts
|
New Replies
|
Recent posts
|
Rules
|
Chatroom
|
Wiki
|
File Repository
|
RSS
|
Submit news
« previous
next »
Send this topic
Print
Pages: [
1
]
Go Down
Author
Topic: Makvision D2929 pending failure (Read 1239 times)
0 Members and 1 Guest are viewing this topic.
newmanfamilyvlogs
Trade Count:
(
+1
)
Full Member
Offline
Posts: 1694
Last login:June 15, 2022, 05:20:38 pm
Makvision D2929 pending failure
«
on:
November 16, 2018, 08:44:20 am »
My D2929 monitor is has started occasionally making a tick noise and the screen starts to vertically collapse then snaps back full size.
Is recapping the monitor the best place to start?
Logged
grantspain
I personally prefer "bog trotter"
Trade Count:
(
+1
)
Full Member
Offline
Posts: 6175
Last login:
Today
at 04:19:23 am
Re: Makvision D2929 pending failure
«
Reply #1 on:
November 16, 2018, 03:24:21 pm »
is this mounted horizontally like a normal tv or vertically?
Logged
newmanfamilyvlogs
Trade Count:
(
+1
)
Full Member
Offline
Posts: 1694
Last login:June 15, 2022, 05:20:38 pm
Re: Makvision D2929 pending failure
«
Reply #2 on:
November 16, 2018, 04:52:09 pm »
Horizontally. It was purchased new from Happ back in 2011 and has seen moderate usage since then. Not sure if it's significant or not, but for most of that usage the brightness was turned up pretty high because it was behind tinted acrylic.
Logged
grantspain
I personally prefer "bog trotter"
Trade Count:
(
+1
)
Full Member
Offline
Posts: 6175
Last login:
Today
at 04:19:23 am
Re: Makvision D2929 pending failure
«
Reply #3 on:
November 16, 2018, 06:32:27 pm »
i would look for bad solder joints, it could be a failing vertical deflection ic or a dodgy cap in the vertical or psu circuit
Logged
Send this topic
Print
Pages: [
1
]
Go Up
« previous
next »
The NEW Build Your Own Arcade Controls
|
Main
|
Monitor/Video Forum
|
Makvision D2929 pending failure