Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Pentranic CH-288  (Read 878 times)

0 Members and 1 Guest are viewing this topic.

syntax_x

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 42
  • Last login:October 27, 2019, 09:32:44 pm
Pentranic CH-288
« on: November 11, 2018, 05:39:22 am »
I have a 33" Pentranic CH-288 that has a very dull image.

The B+ is at 108v so right on spec but the video B+ is 140v instead of around 180v and the 18v line is very low also.

Any pointer as to where I should be looking?

When I crank the V adjust pot to max the picture looks alright, Video B+ is around 177v but B+ is 144!
 Didnt want to blow something so i put it back to 108.


syntax_x

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 42
  • Last login:October 27, 2019, 09:32:44 pm
Re: Pentranic CH-288
« Reply #1 on: November 11, 2018, 05:40:29 am »
Forgot to add its been freshly recapped.