Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Wiring NES Controls to arcade  (Read 1584 times)

0 Members and 1 Guest are viewing this topic.

Exodus

  • Guest
  • Trade Count: (0)
Wiring NES Controls to arcade
« on: July 06, 2002, 04:21:47 pm »
Hey there Im Building an arcade cabinet which will be dedicated to my NES system, Iv'e ordered competition Joysticks and Buttons from HappControls and I want to wire them to the NES Controler, Anyone know how to do this or possibly could help? thanx
you can also e-mail me at vffan@Excite.com
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »

paigeoliver

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10992
  • Last login:March 29, 2022, 06:10:15 pm
  • Awesome face!
Re:Wiring NES Controls to arcade
« Reply #1 on: April 22, 2003, 01:54:55 am »
They can be easily wired up to the PCB out of most any aftermarket trigger stick NES controller. Original controllers are a bit harder to deal with.
Acceptance of Zen philosophy is marred slightly by the nagging thought that if all things are interconnected, then all things must be in some way involved with Pauly Shore.

rampy

  • *shrug*
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2910
  • Last login:March 02, 2007, 11:32:16 am
  • ...as useless as a JPG is to Helen Keller
    • Build Your Own PVR
Re:Wiring NES Controls to arcade
« Reply #2 on: April 22, 2003, 10:16:33 am »
They can be easily wired up to the PCB out of most any aftermarket trigger stick NES controller. Original controllers are a bit harder to deal with.

Are you really bored P.O.?  This is a thread from last year... back when guest posting was still allowed (that's why exodus name is not clickable/says guest below it)

*shrug* not that it's not a good or relevant answer as there has been some recent inquiries about NES console and VS systems hacking lately...

rampy

Frostillicus

  • Arcade Artist
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1291
  • Last login:April 18, 2023, 07:36:29 am
    • My MAME cabinet site
Re:Wiring NES Controls to arcade
« Reply #3 on: April 22, 2003, 11:32:36 am »
heh heh I think someone is trying to increase his number of posts ;)

paigeoliver

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10992
  • Last login:March 29, 2022, 06:10:15 pm
  • Awesome face!
Re:Wiring NES Controls to arcade
« Reply #4 on: April 24, 2003, 05:59:26 am »
They can be easily wired up to the PCB out of most any aftermarket trigger stick NES controller. Original controllers are a bit harder to deal with.

Are you really bored P.O.?  This is a thread from last year... back when guest posting was still allowed (that's why exodus name is not clickable/says guest below it)

*shrug* not that it's not a good or relevant answer as there has been some recent inquiries about NES console and VS systems hacking lately...

rampy

Hee hee. A bit of bored, and a bit of using the search to read old posts. I work overnights with an internet connection, and no real duties, so I have a lot of time on my hands. I (imagine) I will be hyperactive here for about a month, and then fall into just reading and posting from time to time (like I do with all the other forums I am a member of).
Acceptance of Zen philosophy is marred slightly by the nagging thought that if all things are interconnected, then all things must be in some way involved with Pauly Shore.