Arcade Collecting > Merit/JVL Touchscreen

Non-interactive start up

(1/1)

jokerz4fun:
Hey guys. I just started a new Megatouch ion project and when it boots it hangs at entering noninteractive startup. I've tried different hard drives, memory, and I O boards. And I still have the same issue any ideas? Is this bios related? I did log into the BIOS at startup and everything seems to be set to normal default. Motherboard is Asus A7N8X-LA

mahkeymike:
Looks like its hanging right before the sensor and hardware checks. If i had to guess faulty Motherboard. Check to see if there is any capacitors that are swelling.

orizzle:
"Cannot enable port 1, maybe the usb cable is bad"

Never seen that, but I'm guessing something connected to the motherboard or the mobo itself is holding it up.

jokerz4fun:
I worked on it last night and believe it or not it was the USB cable. I swapped it out and it booted right up. Just need to figure some issues out with the io board and I should be all set! thank you guys for all the help I really do appreciate it.

Navigation

[0] Message Index