Arcade Collecting > Merit/JVL Touchscreen

system shut down :-(

(1/2) > >>

Gary.payne:
Hi guy's,

I've just got another megatouch it's the XL platinum and it's got the system shutdown problem, I've tried the del.nvram fix and it hasn't worked probably because this one is booted up from a cd rom rather than a hard drive

can anyone help me clear this?

Thanks
Gary

orizzle:
Post a screenshot of what you're seeing. Does it give you the option for a PIN?

Gary.payne:

This is what I'm getting I've tried clearing the memory with the set up and calibration buttons

Gary.payne:
no option for a pin just goes straight to this screen

orizzle:
Anything happen if you tap the screen a few times?

You may want to try a 2 button clear as described here:

http://www.meritgames.com/Support_Center/manuals/Megatouch%20XL%20Technical%20Service%20Manual.pdf

· Two Button Clear:
1. Turn game power off.
2. Remove the coin box/bill acceptor.
3. Depress and hold the Calibrate and
Set-up buttons located in the rear of
the coin box opening.
4. With Calibrate and Set-up depressed,
turn game power on.
5. Release Calibrate and Set-up buttons
when “2-Button Clear Detected” is
displayed on screen.
6. “2-Button Clear Complete”
· Using the diagnostics software, run the
“Motherboard Tests,” “Processor Test”
and “Co-Processor Test” to make sure
they are each working correctly

Navigation

[0] Message Index

[#] Next page