Author Topic: Monitor is a little shaking, on one site of the screen. (Read 2576 times)

ger · « **on:** October 06, 2018, 03:10:17 pm »

Hello,

I have been reading some topics, But can someone point me in the right direction?
I live in the netherlands, So if it need a recap Where to buy?

Thanks in advance.

Greets,
Ger

ger · « **Reply #1 on:** October 10, 2018, 02:21:44 pm »

Can someone give me Some advice Please?

Greets

Ger

grantspain · « **Reply #2 on:** October 10, 2018, 06:27:21 pm »

make/model of monitor
is there any ballast or other source of electromagnetic influence near the side that has the issues
do you have a video of the problem

ger · « **Reply #3 on:** October 10, 2018, 07:03:10 pm »

Hai,

No balast or EFI.
The video is in the first post.
You Can see the srewdriver(not magnatic) on the left side of the monitor. Image is shaking. On the right side not.

Tnx in advance!

grantspain · « **Reply #4 on:** October 11, 2018, 02:21:21 am »

the horizontal hold is right on the edge of adjustment, is this a hantarex polo?

ger · « **Reply #5 on:** October 11, 2018, 02:57:36 pm »

Hello,

Thank you for your reply.
Tommorow I can check for sure.

I think it is not a hantrax.
Can you see it ?

Greets
Ger.

grantspain · « **Reply #6 on:** October 11, 2018, 05:36:37 pm »

looks like a ---smurfy--- kortek clone, whats that big box of shite next the deflection coils?

ger · « **Reply #7 on:** October 12, 2018, 01:43:03 am »

So it is trash

That box is the Power supply to the pcb game. And some switchbox for the cabinet itself.

grantspain · « **Reply #8 on:** October 12, 2018, 02:25:04 am »

disconnect the degauss coil and move that box away from the deflection coil- see what happens

ger · « **Reply #9 on:** October 12, 2018, 04:10:05 am »

WoW youre the man;-)

The degaus, makes a very little diference.
The big black box is causing the big shake.
I think I will buy a new Power source.
Is iT a problem if I dont connect the degaus?

Thanks in advance.

Ps this is the tube.

grantspain · « **Reply #10 on:** October 12, 2018, 06:30:26 am »

you can plug back in the degauss

that box is just too close to the deflection coil

ger · « **Reply #11 on:** October 12, 2018, 07:00:49 am »

Thank you for the Solution.

Greets Ger.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Monitor is a little shaking, on one site of the screen. (Read 2576 times)

ger

Monitor is a little shaking, on one site of the screen.

ger

Re: Monitor is a little shaking, on one site of the screen.

grantspain

Re: Monitor is a little shaking, on one site of the screen.

ger

Re: Monitor is a little shaking, on one site of the screen.

grantspain

Re: Monitor is a little shaking, on one site of the screen.

ger

Re: Monitor is a little shaking, on one site of the screen.

grantspain

Re: Monitor is a little shaking, on one site of the screen.

ger

Re: Monitor is a little shaking, on one site of the screen.

grantspain

Re: Monitor is a little shaking, on one site of the screen.

ger

Monitor is a little shaking, on one site of the screen.

grantspain

Re: Monitor is a little shaking, on one site of the screen.

ger

Re: Monitor is a little shaking, on one site of the screen.