Author Topic: New Repro HS-1, HS-2 and Red Z Back Control Panels (Read 1961 times)

BrentRadio · « **on:** September 19, 2018, 10:34:10 pm »

Takeman on KLOV is reproing these control panels.

Pre-order ends on Sept 24th

Check it out here if interested:

https://forums.arcade-museum.com/showthread.php?p=3865589&posted=1#post3865589

Only 5 days left in the pre-order!

Let's make this happen!

These will fit Dynamo HS-1 and HS-2 cabs:

HS-1 Panel -23 3/4" wide, SFII with joystick and buttons centered.
HS-1 Blank - 23 3/4" wide

3 KOAM = red Z back:

3-KOAM Panel - 25 1/2" wide
3-KOAM Blank - 25 1/2 wide

nitrogen_widget · « **Reply #1 on:** September 19, 2018, 10:55:16 pm »

I have one of his Berzerk CP's.
It's so beautiful when I actually put it on the machine i'm putting 1/8" plexi over it.

Like grandma with plastic on the furniture.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: New Repro HS-1, HS-2 and Red Z Back Control Panels (Read 1961 times)

BrentRadio

New Repro HS-1, HS-2 and Red Z Back Control Panels

nitrogen_widget

Re: New Repro HS-1, HS-2 and Red Z Back Control Panels